F1: T2 Barcelona D3 – Mclaren

/, Mclaren/F1: T2 Barcelona D3 – Mclaren

F1: T2 Barcelona D3 – Mclaren



Date Thursday 3 March 2016
Driver Fernando Alonso
Location Circuit de Barcelona-Catalunya (4.655km/2.892 miles)
Laps/km/miles 118/549km/341miles
Best lap-time 1m24.870s

Fernando Alonso took over driving duties for the final time during 2016 pre-season testing today at the Circuit de Barcelona-Catalunya. Although the weather was warmer than yesterday, blustery conditions out on track once again affected the balance and handling of the car during runs.
The team enjoyed a full day of running with no major reliability issues, and Fernando was able to complete 118 laps, just shy of Jenson’s tally of 121 laps yesterday.
The testing covered in today’s programme included lower fuel runs this morning and correlation of new aerodynamic components. In the afternoon, the team completed longer runs – simulating race stints on higher fuel – on the Supersoft tyre compound for the first time during the pre-season tests.
The final runs of the day were saved for a variety of set-up and setting changes, as well as aerodynamic evaluation using flow-viz paint.
Jenson will complete McLaren-Honda’s test programme tomorrow on the final day of pre-season testing in Barcelona.

Fernando Alonso
“I’m quite happy with our reliability so far. We’ve worked really hard over the winter and the answers we’ve got – especially on the power unit side – over the last few weeks are quite positive. In terms of performance, we are on standby at the moment, as it’s difficult to read the times in winter testing as they are always changing. We’ll wait for Australia: the same start time, everyone on the track, the same fuel loads and the same tyres for everybody, and then we’ll get the answer. I think there’s still a lot of work to do for us, but hopefully we are much closer than last year on the performance side.
“On the power unit side, there is still some potential to unlock in terms of performance, and also in the next steps that we need to take for the following engines that will come over the first few races. On the chassis side, there are still many things to be tested: some new concepts that we have on the car aerodynamically, and a new re-design on the back of the car that we need to keep studying and understanding how to use that area to maximise our potential.
“At the end of the day, I’ve had three days testing the car – not including the running we lost due to a mechanical issue. When you finish pre-season testing you always feel that there are still many things to test and work on in the car, and I feel the same now. I’m happy with the job we’ve done these past two weeks, but I’m sure during the first two or three races more potential will come, because we’ll have had more track time.”

Eric Boullier
Racing Director
“I’m very pleased once again that we’ve managed to surpass a century of laps on track today. So far, we have enjoyed good reliability in comparison to the same time last year, which has meant we’ve been able to spend a lot of time working on detailed evaluation and correlation of both our chassis and power unit.
“We have been regularly bringing new aerodynamic parts to the car this week, and today focussed heavily on correlating these with our simulation data and testing their compatibility with our chassis. Also new for this year is the suspension design, and we’ve been working hard to understand both its behaviour and how to exploit it to its full potential.
“Likewise, with the power unit, Honda has certainly made big gains in many areas – most notably with reliability until now, and an improvement in the deployment – but there is still a lot more than can be done before we can really maximise its performance.
“Today we ran both the Supersoft and Ultrasoft tyres for the first time in order to perform some race stint simulations and compare the data between the compounds, which was very useful and will help in determining our final set-up ahead of the first grand prix in Melbourne. We only have one more day of pre-season testing left – which as a team you never feel is enough – and we have a lot of work to do tomorrow to ensure we feel as prepared as we can before we fly to Australia.”

Yusuke Hasegawa
Honda R&D Co Ltd Head of F1 Project & Executive Chief Engineer
“We concentrated on maturing and setting our engine modes for race trim, and completed a full day’s running with a stable power unit.
“On our last day of winter testing tomorrow, we plan to continue our evaluations, perform our final power unit data checks and preparations, and finalise our mode settings in order to ready ourselves for the season-opening race in Australia.”

Today’s unofficial testing times
1. Kimi Raikkonen Ferrari 1:22.765 136 laps
2. Felipe Massa Williams 1:23.193 119 laps
3. Nico Hulkenberg Force India 1:23.251 137 laps
4. Max Verstappen Toro Rosso 1:23.382 159 laps
5. Nico Rosberg Mercedes 1:24.126 81 laps
6. Felipe Nasr Sauber 1:24.760 116 laps
7. Fernando Alonso McLaren 1:24.870 118 laps
8. Pascal Wehrlein Manor 1:24.913 48 laps
9. Daniil Kvyat Red Bull 1:25.141 121 laps
10. Jolyon Palmer Renault 1:26.224 98 laps
11. Lewis Hamilton Mercedes 1:26.488 63 laps
12. Romain Grosjean Haas 1:27.196 78 laps

What’s next?
Jenson returns to the cockpit of the MP4-31 again tomorrow for the final day of testing before the Australian Grand Prix.

Test dates
Four days (Tuesday 1 March – Friday 4 March).

2018-07-17T23:08:53+00:00March 3rd, 2016|Formula One, Mclaren|